S Scale Roadway Ramps for AF 20R (Lionel) FasTrack curved grade crossing.

Description

S Scale Roadway Ramps
(MRGS 8020Ramp)
for American Flyer (Lionel) FasTrack
sectional
straight
track
Railroad
grade crossing,
(crossing (MRGS 8020R) available separately)
Laser Cut/Engraved Wood Plank and roadway ramp set (MRGS-8020Ramp) to compliment Railroad Grade Crossing kit (MRGS-8020R). This is the
ramps only
, the crossing is a separate kit (MRGS-8020R) see other auction.  Curved. Cut planks, engraved nail/bolt detail. Specifically designed for LIONEL(R) S American Flyer FasTrack. However, should fit any similar "S" Gauge (1:64 or 3/16 scale) 2 rail track straight section with 0.148" rail height. 4.6" long or 25.5+ scale ft. Wide enough for two traffic lanes. Shims included to raise center to crossing level.   Please look at all the photos to see how crossing ramps install with crossing.  Light color sections to right and left of ramp in photo are scenic additions as part of diorama and NOT included.  Crossing and ramps are supplied in NATURAL wood and are un-painted or stained.  Stained and painted parts in photos are for explanation and to show how crossing/ramps can be finished when installed.
Allows for proper wheel flange clearance. Laser cut to proper fit on all rails. Easy installation, ready to weather to your satisfaction. Real Railroad Prototypical Appearance. Stain or color to your choice or leave natural when installed. See photos of installations.  Covers ties and provides an edge to stop scenery, road surface without fouling track. Installs easily with any type of glue, following instruction on header card.
These ramps and crossings may be used in any S Scale standard gauge application, the crossing is laser cut to clear wheel flanges and may be use with any rail from .090 to .148+ in height. Shim provided (0.040) will provide a total crossing height of 0.130+ and clear any rolling stock operated on 0.148 rail. Use the crossing itself with any thickness shim for other rail height from 0.090 up.
Material provided makes one (1) set of ramps, 1 piece for each side of the track (grade crossing (single track)) with 2 roadway (auto) lanes. We make other S scale crossings and O Scale crossings for the LIONEL (R) Fastrack system and ramps for all. Custom work can be done for special installations.
Multiple purchases are fine, mix or match style/radius OK, shipping will calculate accordingly. Just don't forget you need one set of ramps for each crossing to complete an installation. Thanks for your order. Check my other items & auctions for bulk packages and other radius or straight crossings, order extras and save on freight cost. Discounts available for multiple purchases.
Thanks for your interest.
Payment & Shipping Information:
I do combine items to save you on shipping charges. When you fill out my automatic checkout, your reduced charges will automatically be computed.
Shipping for international orders will also be determined after the close of the auction and will be First Class mail unless requested otherwise, Please NOTE eBay defaults to Global Shipping Program. We must be notified by buyer (YOU) prior to checking out (so we can send you an alternate invoice) if alternative shipping is desired.  Remember VAT is paid by customer not seller.
We prefer PayPal Payments.
Thank you for your interest & please refer us to your Facebook friends after you purchase from us. Check our page and leave us a Like, Thank You.